Start harnessing solar power effortlessly with the UKSOL Plug-In Solar Pro Plus 2 Panel Hybrid Mount Kit 1030W. This plug-in hybrid solar mounting system delivers impressive performance and convenience for your home. Featuring two advanced bifacial glass-glass solar panels, each offering 515W, this kit provides a total capacity of 1030W, paired with an 800W smart microinverter for reliable energy conversion. The panels use TOPCon N-Type monocrystalline cells with twenty-three point two percent efficiency, ensuring you’ll make the most of every ray of sunlight. Built for outdoor durability, the anodised aluminium frames and heat-strengthened glass construction withstand the elements, while the microinverter’s IP67 waterproof rating and Wi-Fi plus Bluetooth connectivity let you monitor performance with ease. Adjustable hybrid mounting frames allow you to optimise panel positioning, and with a warranty, you’ll get peace of mind alongside renewable energy savings. Please note: For optimum performance, position the panels facing south where possible, ideally at approximately a 35° angle, and avoid shading. What's Included: 2 x 515W TOPCon N-Type solar panels (1960 x 1134 x 30mm per panel), 1 x 800W smart microinverter, adjustable hybrid mounting frame, DC cable, 4m AC cable and installation guidance. This product is not suitable for use on balconies. Can be used on the ground (ballasts required-not included) or mounted to a suitable wall only. Disclaimers: Do not use extension leads or coiled cable reels - connect the system directly to a suitable outdoor UK socket-outlet. Extension leads, adapters and coiled cable reels may not be suitable for continuous use and can increase the risk of overheating or damage. Electrical installation suitability - plug-in solar kits must only be connected to a suitable UK socket-outlet on an appropriate final circuit. The electrical installation must be in good condition and have suitable circuit protection and residual-current protection. Electrical assessment required where uncertain - if the socket, final circuit, consumer unit, protective devices, wiring, earthing or general condition of the electrical installation is damaged, unclear, unsuitable or unknown, have it assessed by a qualified electrician before connecting the system. Changes to household electrics - any alterations to fixed household wiring, circuit protection, socket-outlets or the consumer unit must be carried out by a qualified electrician. Age of the electrical installation - there is no specific maximum age for the property or household wiring. Suitability depends on the condition and adequacy of the electrical installation. Specifications: Solar Panels: Number of Panels: 2. Peak Power (PMax): 1030W total / 515W per panel. Module Efficiency: 23.2%. Cell Type: TOPCon N-Type Monocrystalline. Cell Configuration: 216 total (108 x 2). Panel Type: Bifacial glass-glass. Dimensions: 1960 x 1134 x 30mm per panel. Combined Dimensions: 3920 x 1134 x 30mm. Weight: 27.5kg per panel / 55kg panels only. Frame: 30mm anodised aluminium alloy. Front Glass: 2.0mm high-transmission AR-coated heat-strengthened glass. Back Glass: 2.0mm heat-strengthened glass (white grid glass). Junction Box Rating: IP68. Maximum System Voltage: 1500V DC. Maximum Fuse Rating: 35A. Operating Temperature: -40°C to +85°C. Fire Rating: Class C. Panel Electrical Specifications: Voltage at Maximum Power (Vmp): 33.7V. Current at Maximum Power (Imp): 15.28A. Open Circuit Voltage (Voc): 40.3V. Short Circuit Current (Isc): 16.32A. Power Tolerance: 0 to +5W. Smart Microinverter Specifications. Microinverter Rating: 800W. Maximum Continuous Output: 799VA. MPPT Channels: 2 independent MPPTs. Recommended Solar Module Range: 300W-730W. Peak Efficiency: 96.7%. Communication: Built-in Wi-Fi and Bluetooth. Protection Rating: IP67. AC Output Voltage: 230V AC. AC Output Frequency: 50Hz. Maximum Output Current: 3.5A. Operating Temperature: -40°C to +65°C. Monitoring: Smartphone monitoring app. Warranty: 10-Year Warranty.